fw ctl pstat Links fw ctl pstat (checkpoint.com)
Check Point – Policy Layers
Check Point CCSA Course with Experteach
Attended the CCSA Course as a preparation for the Certification. My employee selected me to be under the chosen to have contribute to maintain our Partner Status. So we attended the Course in Person at the Experteach Facility in Duesseldorf, Germany and had a lot of fun with Joerg. After some years of Experience with …
LAG Groups
Some collection of LAG configurations and status commands seen over time. LinuxManually ConfigurationStatusFreeBSDConfig ExampleStatusPermanentCheckpoint ConfigStatus - Clish Status - Expert ModeFortigateConfigStatusCisco - CatalystsConfig StatusLinks Linux Manually Configuration modprobe bonding mode=802.3ad ifconfig bond1 192.168.1.1 netmask 255.255.255.0 up ifenslave bond1 eth0 ifenslave bond1 eth1 The Permanent way depends on the distribution. Status cat /proc/net/bonding/bond1 Ethernet Channel Bonding …
CheckPoint SMS – Upgrade to 81.20
cpmg> installer upgrade** ************************************************************************* **** Checking for new available packages is in progress **** ************************************************************************* **** ************************************************************************* **** Blink Images **** ************************************************************************* **Num Display name Type1 R81.20 Security Management + JHF T41 for Appliances and Open Servers Blink Versioncpmg> installer upgrade 1Existing OS settings and Check Point database are preserved.The machine will automatically reboot after …
FreeBSD bhyve – CheckPoint SMS
So letz move the CheckPoint SMS over to Bhyve. Basicly the same as for the FortiManager. guest=linuxloader="grub"uefi_vars="yes"grub_run_partition="1"grub_run_dir="/grub"grub_run0="root (hd0,0)"grub_run0="linux /vmlinuz-3.10.0-957.21.3cpx86_64 ro root=/dev/mapper/vg_splat-lv_current grub_mode=64bit-normal vmalloc=256M panic=15 console=SERIAL crashkernel=0M-35G:280M,35G-250G:768M,250G-:1G intel_idle.max_cstate=0 eagerfpu=on spectre_v2=off nopti 3 quiet"grub_run1="initrd /initrd-3.10.0-957.21.3cpx86_64.img"memory="8192"disk0_type="ahci-hd"disk0_name="disk0.img"network0_switch="VM"network0_type="e1000"network1_switch="VM"network2_switch="VM"network3_switch="VM"network1_type="e1000"network2_type="e1000"network3_type="e1000"cpu="2" One thing we still need to figure out how to boot this with generic entries. Based on https://github.com/churchers/vm-bhyve/blob/master/sample-templates/gentoo.conf this should load the …
Checkpoint – Gratious ARP
Get the interface IPsip a | grep inet | awk '{print $2}' | cut -d/ -f1 cphaprob -m tablestat ---- Unique IP's Table ---- Member Interface IP-Address MAC-Address (Local)0 2 13.49.132.78 00:1c:7f:c3:ff:b80 24 192.168.0.2 00:1c:7f:a5:ff:d7 1 2 13.49.132.79 00:1c:7f:c3:ff:cc1 24 192.168.0.3 00:1c:7f:a5:ff:6f https://community.checkpoint.com/t5/Security-Gateways/How-to-send-G-ARP-manually/td-p/69895 echo 1 > /proc/sys/net/ipv4/ip_nonlocal_bind ip l | grep UP | grep -v …
Check Point Kernel Settings
cat $FWDIR/boot/modules/fwkern.conf fw_allow_simultaneous_ping=1 fwha_monitor_all_vlan=1 vmalloc_softretry_enable=1 initial_hmem_pct=30 initial_hmemmax_pct=50 hmem_avoid_vmalloc=2 fwha_vmac_disable_promisc_on_standby=1
Check Point – Cluster Policy Install Fails
Check interface settings in SMS. Bond4 should be sync Mgmt should be Cluster + Sync
Check Point – SNMP – SHA1 Support in R81
Check Point has removed SHA1 support from R81. It is possible to get SHA1 back. Applies up to R81.20 clish add snmp usm user myuser security-level authPriv auth-pass-phrase TEMP-AUTH-PHRASE privacy-pass-phrase TEMP-PRIV-PHRASE privacy-protocol AES authentication-protocol SHA512 expert dbset snmp:v3:user:myuser:auth:proto .1.3.6.1.6.3.10.1.1.3 clish set snmp usm user myuser security-level authPriv auth-pass-phrase REAL-AUTH-PHRASE privacy-pass-phrase REAL-PRIV-PHRASE
CheckPoint – Management Data Plane Separation (MDPS)
Patrick Marc's Networks 